Loading ...
Loading ...
Loading ...
10 Initial startup
FILL COFFEE
BEANS
FILLING SYSTEM
SYSTEM RINSINGFILTER RINSING
FILL WATER
TANK
NOTE
At initial startup, the grind
chamber is still empty. After
the first grinding, it is possible
that FILL COFFEE BEANS is
displayed and the machine
does not make coffee.
Press the rotary dial again
for an additional draw; the
process is then repeated
Test strips Deree of
hardness
Water hardness
display
≤
1 red point
1 - 7°
WATER HARDNESS 1
2 red points 8 - 14°
WATER HARDNESS 2
3 red points 15 -21°
WATER HARDNESS 3
(factory settings)
≥ 4 red points > 21°
WATER HARDNESS 4
Set water hardness*
Immerse supplied test strip briefly in water, shake it off and read the test result after
about 1 minute
In the menu, use the rotary dial to select the water hardness read from the test strip
and confirm
Fill water tank (> 0.5l)
Remove the water tank, fill water tank with fresh, cold water without carbonation
(no mineral water), reinsert the tank, and confirm using the rotary dial
Do not fill with any carbonated liquids or any other liquids, or the warranty is void!
Fill coffee bean holder
Fill the coffee bean holder with untreated, roasted coffee beans without foreign objects
or dirt and without sugar, then close the flavour protection cover well and confirm using
the rotary dial
Fill / rinse system, rinse filter
Place a large container (> 0.5 l) under the outlet and confirm with the rotary dial
When operating with filter, confirm again with the rotary dial to fill the system and rinse
the filter
Wait until no more water comes out of the outlet, then empty the container
* for operation without filter
Loading ...
Loading ...
Loading ...