Loading ...
Loading ...
Loading ...
2. TURNING THE HEATER ON
To turn the heater ON, press the POWER button; the power LED will turn on
and the heater will wait in STANDBY Mode.
3. HEATING MODES
Press the MODE button to toggle between the different modes: ECO, HIGH,
LOW and STANDBY. Heater exit from any mode to standby mode by
pressing the STANDBY button
.
4. ECO MODE – 1500W/1000W
ECO mode is a computerized mode to optimize energy efficiency. It will
programmatically select between HIGH and LOW power mode to heat up
the room to the desired temperature in the most effective way. Once the
desired temperature is achieved, the heater will maintain the room to the set
temperature. ECO mode is the environmental friendly operating mode.
5. HIGH POWER MODE – 1500W
HIGH mode will control the heater to operate at high power until the room
reached the set temperature. The heater will stop heating and initiate
component cooling process before turning off the fan. Once the desired
temperature is achieved, the heater will maintain the room to the set
temperature.
6. LOW POWER MODE – 1000W
LOW mode will control the heater to operate at low power until the room
reached the set temperature. The heater will stop heating and initiate
component cooling process before turning off the fan. Once the desired
temperature is achieved, the heater will maintain the room to the set
temperature.
7. SETTING THE TEMPERATURE
Choose the desire Mode: ECO, HIGH, or LOW. To set the desired
temperature:
Press the button once
until the numeric temperature starts flashing.
Press the button again to increase the temperature or the button
to decrease the temperature.
Once the temperature is set, the heater will warm up the room using the selected
Mode. Heater will sample the room temperature every 4 minutes after the
desired temperature is reached.
8. Night Mode
Night mode is design for quiet operation in the night. You can press and hold
MODE button and then press button to set the night mode. The display
will show "ni". In this mode, when the heater reached the set temperature, it
Loading ...
Loading ...
Loading ...