Loading ...
Loading ...
Loading ...
Installation Instructions
27
Place the compression nut and ferrule (sleeve)
onto the end of the tubing as shown. On GE
SmartConnect Refrigerator Tubing kit, the nuts
are already assembled to the tubing.
On models using the refrigeration connection at
the water valve, remove the plastic flexible cap.
CONNECT THE TUBING TO THE
REFRIGERATOR
9
CONNECT THE TUBING TO THE
REFRIGERATOR
(CONT.)
9
Insert the end of the tubing into the refrigerator
connection as far as possible. While holding the
tubing, tighten the fitting.
For plastic tubing from a GE SmartConnect
Refrigerator Tubing kit, insert the molded end of
the tubing into the refrigerator connection and
tighten compression nut until it is hand tight, then
tighten one additional turn with a wrench.
Overtightening may cause leaks.
Fasten the tubing into the clamp provided to hold
it in a vertical position. You may need to pry open
the clamp.
One of the illustrations below will look like the
connection on your refrigerator.
Tubing
Clamp
1/4″
Compression
Nut
Ferrule
(sleeve)
SmartConnect™
Tubing
Refrigerator
Connection
1/4″Tubing
NOTES:
• Before making the connection to the refrigerator,
be sure the refrigerator power cord is not
plugged into the wall outlet.
• If your refrigerator does not have a water filter
we recommend installing one if your water supply
has sand or particles that could clog the screen
of the refrigerator’s water valve. Install it in the
water line near the refrigerator. If using GE
SmartConnect™ Refrigerator Tubing kit, you
will need an additional tube (WX08X10002) to
connect the filter. Do not cut plastic tube to
install filter.
Some models have the refrigerator connection at
the end of tubing located outside the compressor
compartment access cover. On other models the
compressor compartment access cover must be
removed in order to access the refrigerator
connection at the water valve.
Tubing Clamp
1/4″Tubing
1/4″
Compression
Nut
Refrigerator
Connection
Ferrule
(sleeve)
SmartConnect™
Tubing
Loading ...
Loading ...
Loading ...