Loading ...
Loading ...
Loading ...
10
2. Screw the pole collar on the thread to secure the poles
(Fig. 5).
Fitting the Safety Guard
mWARNING! The safety guard must be properly installed.
The safety guard provides partial protection from the risk of
thrown objects to the operator and other bystanders.
1. Fit the safety guard in the groove on the motor housing, as
shown (Fig. 6).
2. Hold the blade hub in place, use the safety guard screw to
x the safety guard in place, as shown (Fig. 7).
Operation
The cordless grass trimmer is designed to cut grass and
weeds under bushes, and on slopes that cannot be reached
with the lawn mower. The trimmer must be used outdoors only,
at an ambient temperature between 41ºF (5ºC) and
113ºF (45ºC).
mWARNING! Remove stones, small sticks and other
objects from the cutting area. The nylon blade will continue
to rotate for a few seconds after the trimmer is switched o.
Let the motor come to a complete stop before switching the
trimmer back on. Do not rapidly switch the trimmer o and on.
mWARNING! Rocks or debris may ricochet or be thrown
into eyes and face, cause blindness, or other serious injury.
Never lean over the trimmer head and always wear eye
protection.
ON/OFF Switch
1. Insert the battery into the battery compartment on the
back of the machine. Press until it clicks into position.
Press and hold the safety lock button, then squeeze the
ON/OFF switch. When the machine runs steadily, release
the safety lock button (Fig. 8).
Fig. 4
Upper pole
assembly
Pole collar
Lower pole
assembly
Pole collar
Fig. 5
Safety guard
Fig. 6
Groove
Safety guard
Fig. 7
Safety guard
screw
In order to operate this cordless grass trimmer you will need
and a 24V iON+ System battery and charger. See page 14
for battery and charger options and specications, or for
more information visit sunjoe.com.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
Loading ...
Loading ...
Loading ...