Loading ...
Loading ...
Loading ...
6
TEMPERATURE LIMITING CONTROL
This heater is equipped with Temperature Limiting Control. Should the heater reach an
unsafe temperature (212 degrees F / 100 degrees C), the heater will automatically turn
off. To reset:
1.
Unplug the power cord from the outlet.
2.
Turn the ON/OFF switch on the control panel to OFF.
3.
Wait 5 minutes.
4.
Inspect the electric fireplace to make sure that no vents are blocked, or clogged
with dust or lint. If they are, use a vacuum to clean the vent areas.
5.
With the power switch OFF, plug the power cord back into the outlet.
6.
If the problem continues, have your outlet and wiring inspected by a professional.
CARE AND MAINTENANCE
Always turn the heater OFF and unplug the power cord from the outlet before cleaning,
changing the lightbulbs, or moving the stove. Failure to do so could result in electric
shock, personal injury, or fire.
Never immerse in water or spray with water. Doing so could result in electric shock,
personal injury, or fire.
CLEANING
Metal: Buff using a soft cloth, slightly dampened with a citrus oil-based product.
DO NOT use brass polish or household cleaners as these will damage the
metal.
Glass: Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
NEVER use an abrasive cleaner or any cleaner that could scratch the
surface.
Plastic: Wipe with a slightly damp cloth and a mild solution of dish soap and warm
water.
Vents: Use a vacuum or duster to remove dust and dirt from the heater and vent
areas.
Loading ...