Loading ...
Loading ...
Loading ...
57
Chapter 4
Configure the Router in Standard Router Mode
Virtual Servers can be used for setting up public services on your local network, such
as HTTP, FTP, DNS, POP3/SMTP and Telnet. Different services use different service ports.
Port 80 is used in HTTP service, port 21 in FTP service, port 25 in SMTP service and port
110 in POP3 service. Please verify the service port number before the configuration.
Share my personal website I’ve built on local network with my
friends through the Internet.
For example, the personal website has been built in my home
PC (192.168.0.100). I hope that my friends on the Internet can
visit my website in some way. My PC is connected to the router
with the WAN IP address 218.18.232.154.
Router
WAN: 218.18.232.154
LAN
Home
Personal Website
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to Advanced > Forwarding > Virtual Servers.
4. Click Add New. Select HTTP from the Common Service
Port list. The Service Port, Internal Port and Protocol will be
automatically filled in. Enter the PC’s IP address 192.168.0.100
in the IP Address field.
5. Leave the status as Enabled and click Save.
Note:
• It is recommended to keep the default settings of Internal Port and Protocol if
you are not clear about which port and protocol to use.
• If the service you want to use is not in the Common Service Port list, you can enter
the corresponding parameters manually. You should verify the port number that
the service needs.
I want to:
Loading ...
Loading ...
Loading ...