Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
IMPORTANT
Do not overtighten.
BRASS NUT
SLEEVE
90º ADAPTER
C
A. Remove nut and sleeve from one end of compression
union.
B. Take compression nut and sleeve provided with the
compression union and place nut first, then sleeve, on
tube from refrigerator .
C. Slide the brass insert provided with the refrigerator inside
the plastic tubing.
D. Place tubing squarely into body of compression union,
slide sleeve and nut into position on threads and tighten.
E. Remove nut and sleeve from other end of compression
union and discard.
F. Connect the end of the stainless steel connector to the
other end of compression union and tighten.
G. Turn on water supply and check for leaks. If leaks occur,
tighten connection and recheck for leaks.
B
A. Remove brass nut and sleeve from 90° water supply adapter.
B. Remove the compression nuts and sleeves from the brass
compression union.
C. Wrap Teflon tape around one side of the compression union
threads
.
D. Insert the wrapped threads of the body of the compression union
into the 90° water supply adapter and tighten.
E. Remove nut and sleeve from other end of compression union and
discard.
F. Connect the end of the stainless steel connector to the other end of
the compression union and tighten.
G. Turn on water supply and check for leaks. If leaks occur, tighten
connection and recheck for leaks.
A. Take nut and sleeve from end of compression union and
place nut first, then sleeve, on tube from refrigerator .
B. Place tubing squarely into body of compression union,
slide sleeve and nut into position on threads and tighten.
C. Remove nut and sleeve from other end of compression
union and discard.
D. Connect the end of the stainless steel connector to the
other end of compression union and tighten.
E. Turn on water supply and check for leaks. If leaks occur,
tighten connection and recheck for leaks.
Connect the other end of the stainless steel water line
directly to the ice maker inlet located on the back of the
refrigerator (Figure A) unless :
...the refrigerator icemaker inlet has 1/4" copper tube
(Figure B). Then use the 1/4" brass compression union
enclosed:
...the refrigerator icemaker inlet has 1/4" plastic tube (Figure B).
Then use a 1/4" brass compression union enclosed:
...the refrigerator icemaker inlet has 90° Water Supply
Adapter (Figure C). Then use a 1/4" brass compression
union enclosed:
Pg. 3
WATER
SUPPLY VALVE
STAINLESS STEEL
CONNECTOR
ICEMAKER INLET
A