Loading ...
Loading ...
Loading ...
Both earpieces are now
powered on and are paired
with each other.
The earpieces is now in pairing
mode and is ready to pair with a
Bluetooth device (e.g. a mobile
phone).
Turn on the Bluetooth function of
your Bluetooth device.
Note
yAfter powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
In right earpieces, it has voice
“Connected”and LED goes o on
both earpieces and ash 1 time
every 10s. You can use your device
to play music or make a call.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
Philips TAT2205/
TAT2235/ TAT2245
Turn on the Bluetooth function of
your Bluetooth device, select Philips
TAT2205/TAT2235/TAT2245
Enter the earpieces password
“0000” (4 zeros) if prompted. For
those Bluetooth devices featuring
Bluetooth 3.0 or higher, no need to
enter a password.
The following example shows you
how to pair the earpieces with
your Bluetooth device.
Pair the earpieces with
your Bluetooth device at
the st time
Make sure that the earpieces is fully
charged.
Auto power on: open the charging
capsule, the earpieces discharged
and the blue LED indicator ash for 3
times with “power on” voice prompt;
Manual power on: on both earpieces
press and hold the multi-function
buttons for approxinmately 3s.
The right earphone led ashes
alternately in white and blue, and
the left earphone LED is o for 10s
and the blue LED ashes once.
Blue LED
ashes once
for 10s
LED ashes
alternately in
white and blue
Loading ...
Loading ...
Loading ...