Loading ...
Loading ...
Loading ...
5
7. INSTALL THE HOOD
1. Align the hood and center it above the hood mounting bracket. Gently lower
the hood until it securely engages the bracket.
2. Level the hood.
3. With the hood hanging in place, mark the four hole locations on wall (see
illustration at right).
4. Remove the hood.
5. Drill through marked holes on wall using a 3/32" drill bit.
6. Hang the hood to the wall bracket.
7. Secure the hood to the wall using 2 #8 x 1-1/2" Phillips flat head screws for top holes. Use 2 washers and 2 #8 x 1-1/2" Phillips flat head
screws for bottom holes.
WARNING
!
BE CAREFUL when installing the decorative flue and hood, they may have sharp edges.
HOLE LOCATIONS
6. REMOVE GREASE FILTER(S)
Lay the back side of the hood flat on a table. Use a piece of cardboard to
avoid damaging the table or the hood.
To remove the grease filters, push the filter latch down and tilt each filter
downward. Set filters aside.
B
C
HD1269
Detach the junction box cover from the top of the hood by removing both retaining
screws. Set aside the cover and the screws.
HO0384
Install the damper using 4 M4 x 8 Phillips round head screws.
HO0389
Loading ...
Loading ...
Loading ...