Loading ...
Loading ...
Loading ...
– 9
Note: Due to removing the handle, ac-
cessories can be directly attached to
the suction hose.
Recommendation: In order to vacu-
um the floor, attach the handle to the
suction hose.
See position 13.
Illustration
Put both suction pipes together and
connect them with the handle.
For edges, joints, heaters and hard
to reach locations.
Illustration
For appliances with only one insert:
Note: For vacuuming dry dirt or wa-
ter off the floor - always work with
the insert (brush strip and rubber
lip) in the floor nozzle.
For appliances with two inserts:
When vacuuming dry dirt off the
floor, clip an insert with two brush
strips into the floor nozzle.
When vacuuming water off the
floor, clip an insert with two rubber
lips into the floor nozzle.
Illustration
To connect the suction hose with an
electric tool
Adapt the adapter to the connection
diameter of the electric tool using a
knife if necessary.
Caution
Always work with an inserted
cartridge filter during wet as well
as dry vacuum cleaning!
Illustration
Mount loose parts delivered with
appliance prior to start-up.
Illustration
Connect accessories.
Illustration
Plug in the mains plug.
Illustration
Turn on the machine.
Caution
Check the filter for damage prior
to installation and replace as
necessary.
Work with a dry cartridge filter
only!
Illustration
Recommendation: To vacuum fine
dust, use the filter bag.
– The filling level of the filter bag de-
pends on the dirt that is sucked in.
– The filter bag needs to be replaced
more frequently while sucking in
fine dust, sand, etc.
– Clogged filter bags can burst -
therefore make sure to replace the
filter bag in a timely manner!
Caution
Vacuum cold ashes only when
using a pre-filter.
Order no. basic design: 2.863-139.0,
premium design: 2.863-161.0.
suction pipes 2 x 0.5 m
Crevice nozzle
Floor nozzle
(with inserts)
Adapter
Operation
Before Startup
Start up
Dry vacuum cleaning
Information filter bag
9EN
Loading ...
Loading ...
Loading ...