Loading ...
Loading ...
Loading ...
5
Features
Rear Panel
1. Media Panel Buttons: Controls for the USB/SD, FM
radio, and Bluetooth
©
audio sources. These controls
include mode selection and music playback options.
See Media Panel for more information.
2. USB Port: Connect your USB flash drive here to play
music. You can also use this port for charging the
USB device, such as a tablet or smartphone. To
charge a device that is streaming music via
Bluetooth, pause the music first and then wait for it to
reconnect after the USB cable is inserted.
3. SD Card Slot: Insert your SD card here to play music.
4. Display: This screen shows information relevant to
Total PA
™
Prime’s current operation.
Note: The Display comes with a plastic protector on
it. Remove this for optimal viewing.
5. Mic Inputs (1/4” / 6.35 mm & XLR): Connect a
microphone or mic-level source to these inputs.
6. Aux Inputs (1/8” & XLR): These inputs can be used
to connect a CD player, MP3 player, or other audio
source.
7. Mix Out (XLR): Connect this output to a speaker,
mixer, or recorder.
8. Control Knob: Turn this knob to adjust the main
volume (overall output) of the loudspeaker. Push this
knob to select and make adjustments to the mic 1
volume, the mic 2 volume, source volume (radio,
USB, SD, Bluetooth signal, and aux input), echo
effect, high EQ, and low EQ. The volume of Total PA
™
Prime does not affect your Bluetooth device volume.
For the best sound quality, set your input source
volume to 100% and use the Source and Main
Volume control of the speaker to adjust the volume.
9. Repeat/Link: In USB or SD mode, press this button
to repeat a single track, folder, or all tracks. Press and
hold this button to start stereo linking to another
compatible ION speaker (see ionaudio.com for a list of
compatible speakers).
10. Mode: Press this button to select the audio source to use: USB, SD, FM radio, Aux (available to
select when the USB port and SD card slot are empty), or Bluetooth.
11. Acoustic Optimization
™
: Use these presets to select the Venue/Event and the speaker will
automatically jump to an appropriate volume level mix, EQ setting, light mode, and mic echo
setting. For best results, set your music source at 100% volume. See Acoustic Optimization for a
chart of the specific settings.
12. Clip LED: The Clip LED will flash red if the signal from the input jacks or Media Panel audio source
is clipping (distortion from an overly loud signal). If this happens, decrease the setting of the Main
Volume knob or the volume for the Aux/Mic Input (if a loud device is plugged into either).
8
15
1
2
1
4
1
3
1
6
9
10
1
1
1
7
12
1
5
14
11
13
Loading ...
Loading ...
Loading ...