Loading ...
Loading ...
Loading ...
5. To release the brake holding latch, squeeze and release the brake lever. It
will return to its unlocked position.
NOTICE
The brake holding latch may relax if left on for a long period of time. Always
block the wheels to prevent rolling. Always block the wheels on the downhill
side of the ATV if leaving it parked on a hill. Another option is to park the ATV in
a sidehill position. Never depend on the brake holding latch alone if the ATV is
parked on a hill. Always block the wheels to prevent rolling.
AUTOMATIC TRANSMISSION GEAR SELECTOR
The transmission gear selector
q
is
located on the right side of the vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
To shift gears, brake to a complete
stop. When the engine is idling, move
the lever to the desired gear.
NOTE
Shifting gears with the engine speed above idle or while the vehicle is moving
could cause transmission damage.
Whenever the ATV is left unattended, always place the transmission in PARK
and lock the parking brake.
BELT LIFE
To extend belt life, use low forward gear when pulling a heavy load at less than
seven miles per hour for extended periods and when operating uphill at a slow
speed.
MIRRORS
Use the mirrors located on each side of the vehicle to assist in traffic maneuvers.
Always check and adjust the mirrors before driving the vehicle.
35
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...