Loading ...
Loading ...
Loading ...
11
Operation
Starting + Stopping
mCAUTION! Starting, stopping, and restarting a DC
motor repeatedly within a few seconds can generate a great
deal of heat and damage the motor. To protect the life of your
cordless workshop blower + vacuum, always wait at least ve
seconds after stopping before restarting the workshop blower
+ vacuum.
1. Insert the battery into the battery compartment until it
clicks to lock it into position (Fig. 10).
2. To start the cordless workshop blower + vacuum,
press the ON/OFF trigger once (Fig. 11).
3. To turn the tool o, press the ON/OFF trigger once more
(Fig. 11).
4. To control the speed, use the speed selector and slide to
choose HIGH or LOW (Fig. 12).
Operating Tips
mWARNING! Use the cordless workshop blower +
vacuum only in daylight or good articial light.
• When using the cordless workshop blower + vacuum,
plant your feet rmly on the ground and place your
dominant hand on the unit handle to control the unit.
Use your other hand to steady the unit as needed.
• Wear personal protective equipment during your work
session. This includes boots, safety glasses/goggles,
ear defenders, long pants and a long-sleeve shirt.
• Make sure the Blower + vacuum tube is not directed at
anybody or any loose debris before starting the unit.
• Verify that the unit is in good working condition. Make sure
the tubes are in place and secure.
• Keep a rm grip on the unit handle while in use.
• To reduce the risk of hearing loss associated with
increased sound levels, hearing protection is required.
• Operate power equipment only at reasonable hours—
not early in the morning or late at night when people might
be disturbed. Comply with times listed in local ordinances.
Usual recommendations are 9:00 am to 5:00 pm,
Monday through Saturday.
• To reduce noise levels, limit the number of pieces of
power equipment used at any one time and operate power
workshop blower + vacuums at the lowest possible speed
setting necessary to do the job.
• Use rakes and brooms to loosen debris before blowing.
• In dusty conditions, slightly dampen surfaces.
• Blow debris into a safe, open area away from children,
pets, open windows or freshly washed cars.
• Clean up after using the workshop blower + vacuum and
other lawn equipment. Dispose of debris appropriately.
mWARNING! To avoid serious personal injury,
wear ear defenders, goggles or safety glasses at all times
when operating this unit. Wear a face mask or dust mask in
dusty locations.
Fig. 10
Battery
pack
Battery
Compartment
Fig. 11
ON/OFF trigger
Fig. 12
Loading ...
Loading ...
Loading ...