Loading ...
Loading ...
Loading ...
©2017 Spectrum Brands, Inc.
The hole in the door frame for the latch bolt is
not drilled deep enough.
Make sure the hole in the door frame is drilled at least 1” (25 mm) deep.
The mounting plate is placing tension on the
torque blade.
Attempt to lock and unlock the door with the interior turnpiece. If it is
unable to rotate, remove the interior assembly from the mounting plate.
Attempt to rotate the torque blade with a screwdriver. If it is still unable
to rotate, loosen the screws on the mounting plate and reposition the
plate so there is no tension on the cylinder torque blade. Test the torque
blade again with a screwdriver, making sure the latch bolt can operate
smoothly. Reinstall the interior assembly.
The clutch is disengaged.
Remove the battery pack. Remove the interior assembly from the
door. Verify that the lock can be operated smoothly with the key while
the interior is removed. Attempt to rotate the turnpiece on the interior
assembly to the vertical position. If it cannot rotate to the vertical position,
the clutch has become disengaged.
Place the battery cover onto the interior assembly, making sure to align
the turnpiece with the shaft. Rotate the turnpiece 180° clockwise (you
will need to use force when rotating the turnpiece, and you will hear it
click). This will re-engage the clutch.
180°
Align the turnpiece with the torque blade and reinstall the interior
assembly on the door.
66852 / 01
954
9 / 16
Technical Support
1-866-863-6584
www.kwikset.com
Loading ...
Loading ...
Loading ...