Loading ...
Loading ...
Loading ...
30 - ENGLISH
ALTERNATE SETUP
Set up your SoundTouch
®
Wireless Link
using a computer
You can set up your SoundTouch® Wireless Link using a computer rather than a
smartphone or tablet.
Before you begin
• Position your SoundTouch® Wireless Link next to your computer.
• Make sure your computer is on your Wi-Fi® network.
• Obtain a USB A to USB Micro B cable (not provided).
Notes:
• A USB A to USB Micro B cable is commonly used for charging mobile devices. You
can also purchase this part at your local electronics store. If you don’t have this
cable, contact Bose® customer service to receive this part. Refer to the contact
sheet in the carton
• The USB connector on the back of your SoundTouch® Wireless Link is for computer
setup only. The USB connector is not designed to charge smartphones, tablets,
similar devices, or the SoundTouch® Wireless Link itself.
Computer Setup
During setup, the app prompts you to temporarily connect the USB cable from the
computer to your SoundTouch® Wireless Link. Do not connect the USB cable until the
app instructs you to do so.
1. Plug the power cord into an AC (mains) power outlet.
2. On your computer, open a browser and go to:
global.Bose.com/Support/STWL
Tip: Use the computer where your music library is stored.
3. Download and run the SoundTouch® app.
The app guides you through setup.
4. After setup is complete, disconnect the USB cable from your computer and from
your SoundTouch® Wireless Link. Move your SoundTouch® Wireless Link to its
permanent location.
Loading ...
Loading ...