Loading ...
Loading ...
Loading ...
MAINTENANCE
If you drop the blower, carefully inspect it for damage. If the
tube is broken, housing cracked, or handles broken or if you
see any other condition that may affect the blower’s
operation, call our customer service help line at 1-800-618-
7474 for assistance.
To clean the tool, make sure the battery is detached from
the unit, then use only mild soap and a damp cloth. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
IMPORTANT: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment should
be performed by an authorized service center or other
qualified service organization, always using identical
replacement parts.
CAUTION: Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in
contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals. Do not store the
tool on or adjacent to fertilizers or chemicals.
STORING THE BLOWER
Clean the blower thoroughly before storing. Store the
blower in a dry, well-ventilated place that is inaccessible to
children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.
■ Store and charge your batteries in a cool area.
Temperatures above or below normal room temperature
will shorten battery pack life.
■ Never store batteries in a discharged condition. Wait
for battery pack to cool and fully charge immediately.
■ All batteries gradually lose their charge. The higher the
temperature, the quicker they lose their charge. If you
store your unit for long periods of time without using it,
recharge the batteries every month or two. This practice
will prolong battery pack life.
■ Recharge batteries every 3 months.
When not in use, your Cordless Blower should be stored
indoors in a dry and high or locked-up place, out of reach
of children.
TROUBLESHOOTING
Problem
- Unit does not run
Possible Cause
- Battery not making contact
- Battery not installed properly
- Battery not charged
Possible Solution
- Check battery is fully inserted
- Check that battery is securely connected to the blower
- Check battery charging requirements
- Battery will not charge - Battery not inserted into charger
- Charger not plugged in
- Surrounding air temperature too hot or too cold
- Insert battery into charger until LED appears
- Plug charger into a working outlet
- Check current at receptacle by plugging in a lamp or other
appliance
- Check to see if receptacle is connected to a light switch which
turns power off when you turn out the lights
- Move charger and tool to a surrounding air temperature of
above 39 degree F (4 degree C) or below 104 degree F ( +40
degree C)
6
Model LB20040S
Loading ...
Loading ...
Loading ...