Loading ...
Loading ...
Loading ...
UNPACKING AND TESTING FIREPLACE
Carefully remove the unit from the box. Prior to installing the unit, test to make sure the unit operates properly.
To do this, plug the unit's power supply cord into a conveniently located 120 Volt grounded outlet.
INSTALLATION
WARNING: RISK OF FIRE! The power cord must not be pinched or against a sharp edge. Secure cord to
avoid tripping or snagging to reduce risk of fire, electric shock or personal injury. Do not run cord under
carpeting. Do not cover cord with throw rugs, runners or other fabric. Arrange cord away from traffic area and
where it will not be tripped over.
WARNING: RISK OF FIRE! To prevent a possible fire, do not block air intake or exhaust in any manner. Do
not use on soft surfaces where openings may become blocked.
WARNING: RISK OF FIRE! Do not blow or place insulation against the fireplace.
WARNING: This electric fireplace is tested and listed for use only with the approved optional accessories. Use
of optional accessories not specifically tested for this electric fireplace could void the heater warranty and/or
result in a safety hazard.
WARNING: If the information in these instructions is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death. Do not store or use gasoline or other flammable vapors in
the vicinity of this or any other heater.
Loading ...
Loading ...
Loading ...