Loading ...
Loading ...
Loading ...
14
the product). If the component
is not available, or if it is lost
or fallen, position the product
so that at least 5 cm clearance
shall be left between the rear
surface of the product and the
wall of the room. The clearance
at the rear is important for
efficient operation of the
product.
4.2.Adjusting the Feet
If the product stands unbalanced
after installation, adjust the feet
on the front by rotating them to the
right or left.
4.3.Electrical Connection
A
WARNING: Do not make
connections via extension
cables or multi-plugs.
B
WARNING: Damaged
power cable must
be replaced by the
Authorized Service Agent.
C
If two coolers are to be
installed side by side,
there should be at least
4 cm distance between
them.
• Our company shall not be
liable for any damages that will
arise when the product is used
without grounding and electrical
connection in accordance with
the national regulations.
• Power cable plug must be within
easy reach after installation.
• Do not extension cords or
cordless multiple outlets
between your product and the
wall outlet.
4.4.Attaching the plastic wedges
Use the plastic wedges in the provided
with the product to provide sufficient
space for air circulation between the
product and the wall.
1. To attach the wedges, remove
the screws on the product and
use the screws provided with
the wedges.
2. Attach 2 plastic wedges on the
ventilation cover as shown in
the figure.
Loading ...
Loading ...
Loading ...