Loading ...
Loading ...
Loading ...
39
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Fan noise after
a wash program
has finished
This is normal. The fan
continues to run to assist
with drying.
The fan will automatically stop after a set
time, or when the drawer is opened. the fan
may resume when drawer is closed again.
Fan noise starts
when I close the
drawer, even
though I didn’t
start a new wash
This is normal. In some
cases, the fan will run
when the drawer is closed
for a set time after a
program has finished.
The fan will automatically stop after the set
time is over.
No powdered
detergent
dispensed
Detergent dispenser was
wet when loaded.
Clean the dispenser and ensure it is
dry before adding detergent. Refer to
'Detergent' for more information.
The wash seems
to have finished,
but the drawer
will not open
The wash is still in
progress. It is in a quiet
phase that is needed for
optimal performance.
No action required. The program will
transition into a more audible phase after
the quiet phase is over.
Water pooling
on inner rim of
drawer after
a wash
This is normal
condensation.
Wipe dry.
Water under
the filter
This is normal. No action required.
Excess water in
the drawer
Drain hose(s) bent. Straighten the drain hose(s).
Blocked filters. Refer to 'Maintenance'.
Water marks on
the dishes
Rinse aid depleted. Refill the rinse aid dispenser.
Rinse aid setting too low. Increase/turn on the rinse aid setting.
DishDrawer™ Dishwasher
overloaded/incorrectly
loaded.
Refer to 'Loading suggestions'.
Dents or
marks on the
drawer interior
This is normal. Daily
use may cause minor
cosmetic dents.
Take care when loading the
DishDrawer™ Dishwasher.
Drawer interior
is stained
Some foods may stain the
inside of the drawer.
Pre-rinse dishes before placing in the
drawer. Alternatively, use
RINSE after
adding the dishes may minimise staining.
Loading ...
Loading ...
Loading ...