Loading ...
Loading ...
Loading ...
37
SMART FUNCTIONS
ENGLISH
3
Press and hold
Remote Start
button for 3
seconds to enable the remote control function.
4
Start a cycle from the
LG ThinQ
application on
your smartphone.
NOTE
• Once this function is enabled, you can only start
a cycle from the
LG ThinQ
smartphone
application. If the cycle is not started, the
appliance will wait to start the cycle until it is
turned off remotely from the application or this
function is disabled.
• If the door has been opened, you can not start a
cycle remotely.
Disable this function manually
When this function is activated, press and hold the
Remote Start
button for 3 seconds.
Deactivating Network
Connection
1
Press the
Power
button on the control panel.
2
Press and hold the
Spin
and
Delay End
buttons
simultaneously for 3 seconds to deactivate
Network Connection.
Standby Power Consumption
NOTE
• The activation of the network connection may
increase the power consumption of the
appliance.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in
this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to
you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensou[email protected]. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Smart Diagnosis
This feature is only available on models with the
c
or
d
logo.
Use this feature to help you diagnose and solve
problems with your appliance.
NOTE
• For reasons not attributable to LGE’s negligence,
the service may not operate due to external
factors such as, but not limited to, Wi-Fi
unavailability, Wi-Fi disconnection, local app
store policy, or app unavailability.
• The feature may be subject to change without
prior notice and may have a different form
depending on where you are located.
Standby power consumption
0.5 W
Network standby power consumption
2.0 W
The period of time after which the
power management function, or a
similar function, switches the
equipment automatically into standby
and/or off mode and/or the condition
providing networked standby
20
minut
es
global_main.book.book Page 37 Tuesday, May 11, 2021 5:33 PM
Loading ...
Loading ...
Loading ...