Loading ...
Loading ...
Loading ...
Page 20 of 24 802254 - HT BC, BCHA, AIO, User Guide - June 2015 - V2.00
Safety
LCD Screen operation - Section G
B
C
A
To Activate the Hot Isolation: (Not for HydroTap Arc/Cube)
*
The HydroTap is equipped with a safety mode that allows for additional
safety protection, if needed.
Hot Isolation
•
Selecting [Yes] on the menu screen allows Hot Isolation to be activated/
deactivated from the tap
•
Press button - Enable to activate Hot isolation.
•
Press button - Disable to de-activate Hot isolation.
•
To operate the tap when in Hot Isolation mode, tap the Safety Lock
(3) three times rapidly, the LED’s will scroll from right to left (3)
three times. This operation confirms de-activation. The Hot Isolation
can be immediately set again, by tapping the safety lock (3) times
rapidly. However, if resetting has been overlooked, the unit will revert,
automatically to Hot Isolation active mode after 30 seconds.
Note:
*
Hot Isolation - Not available for the HydroTap Arc/Cube Tap.
Do not enable this function for the HydroTap Arc/Cube.
C
C
*
Note: When NO is selected the safety lock cannot be changed from it’s
current setting. To change the safety settings, first select YES before making
the change.
B
To set the tap safety setting:
•
Press [MENU] button for main
menu.
•
Press [Setting] button.
•
Press [Safety] button.
•
Press button - YES to allow
the safety setting to be changed
To Enable or Disable the safety on the tap
•
Press button to select Enable / Disable
B
A
Loading ...
Loading ...
Loading ...