Loading ...
Loading ...
Loading ...
SET UP & USE
Page 7
OPERATION OF YOUR FAN
Take out the fan from the packing carton. Turn the fan upright and it is now ready for
use.
USING YOUR FAN
• Turn speed control to choose from three speeds – 1 – Low, 2 – Medium, 3 – High
• When finished, turn speed control to 0 – O
REPLACING THE FUSE
• Disconnect fan from power outlet by grabbing the plug at the end of the cord. Do
not unplug by pulling the cord itself
• Open fuse cover located in the side of the power cord plug by sliding it toward the
plug blades (Fig 1)
• Remove fuse carefully by taking a small tool and slowly prying out one end. Once
you have one end out, slowly pry out the other end.
• To avoid the risk of fire, replace only with similar 2.5 Amp, 125V fuse.
• Close fuse cover by sliding cover toward the top of the plug.
CAUTION: Do not attempt to replace the plug itself. Discard the product entirely if
the plug itself is damaged.
CLEANING AND MAINTENANCE
WARNING: Be sure to unplug from the electrical supply source before cleaning.
Be sure not to get water or any other liquid inside the motor.
Do not disassemble the fan for cleaning.
• Plastic parts of the fan should be cleaned with mild soap and a damp cloth or
sponge. Rinse with clean water to remove any soapy film residue.
Fig. 1
Loading ...
Loading ...
Loading ...