Loading ...
32
A
B
C
D
E
F
H
G
I
①
②
①
②
①
②
①
②
c
d
d
e
a
b
①
②
②
①
1 3
2
Parts identification
(See fig. 1)
A Protective cap with mirror
B Outer blade
C Outer blade frame
D Inner blade
E Filter
F Joint
G On/off switch
Slide the switch upward to turn
the trimmer on.
H Vent
I Battery cover
READ ALL INSTRUCTIONS
BEFORE USE.
Replacing battery
(See fig. 2)
Turn the battery cover
counterclockwise and match the line
a with b and pull to remove. Insert
one AA (LR6) battery. To replace the
battery cover, reverse the above
procedure.
Using your trimmer
Take care not to cover the vent, then
turn on the switch and carefully insert
the tip of the outer blade into your
nostril or an ear hole to trim the nose
and ear hairs.
Maintenance
Be sure that the switch is turned off
before removing, replacing or
cleaning the blades.
To remove the outer blade frame,
turn it and match the line c with d
and pull upward. (See fig. 3)
Detach the inner blade from the outer
blade. Wipe the blades with a tissue
to remove any cut hairs, dust, etc.
Then to remove the filter, turn it and
match the line d with e.
Shake off the hair clippings.
THE WHOLE UNIT CAN BE
WASHED IN WATER.
DO NOT USE BOILED WATER.
After cleaning, replace the filter, the
inner blade and the outer blade.
If used once a week for approx. 1 min.
at a time, the life of the blades is
approx. 3 years.
Caution
To avoid the risk of personal injury,
follow these instructions:
A Keep this device away from the
reach of children. This is not a toy.
A Insert this device gently into your
nose or outer ear. Do not insert it
deep into your nose or your outer
ear.
A Before each use, check the blades
for damage. Do not use this device
if the outer blade frame or blades
are deformed or damaged.
A
The blades have been precision
manufactured. Do not subject them
to mechanical force, impact, drop,
etc. Place the protective cap over the
outer blade frame after each use.
A This trimmer is designed only for
cutting nose and ear hairs. Do not
use it for any other purpose.
A Ensure that the switch is turned off
before cleaning the blades.
A Do not wipe it with thinner, benzine
or alcohol. Clean it by cloth with
soapy water.
A Do not attempt to modify or
disassemble and repair the product
yourself.
00-03ER430USA 06.03.09 10:19 ページ2