Loading ...
Loading ...
Loading ...
Settings
92
Volume
The volume can be changed for the
audible signal that sounds when the
dryer is switched on and at the end of
the program. The volume of the audi-
ble signal that sounds when a sensor
button is touched can also be
changed.
Options
- Finish tone
- Keypad tone
- Welcome Tone
It can be set to one of 7 different levels
or switched off altogether.
Display brightness
The brightness of the display can be
altered.
It can be set to one of 7different levels.
Factory default: medium setting
“Display” off status
To save energy the display and sensor
buttons will go out after 10minutes
and the Start/Stop button will flash
slowly. You can alter this setting.
Options
- Off
The display will remain on (i.e., it will
never go out).
- On
The display will go out (after 10min-
utes):
– if a program is not selected after
the dryer has been switched on
– during the current program
– at the end of a program
- On -Not in current prog.
(Factory default)
The display will go out (as described
above) but will remain on while the
program is running.
You can switch the display back on by
touching any sensor button.
Loading ...
Loading ...
Loading ...