Loading ...
Sheet SKU#011141 Revision 8/30/00
SB-GM-VET/10W3, JL AUDIO, Inc 2000 • Page 2
CAUTION: Check under the vehicle for any loose
brake lines, fuel lines or other hazards before drilling.
Always wear eye protection when drilling.
STEP 7: Drill a 3/8" diameter hole through the cargo area floor
using the indentation in the wax squares as guides. Make sure
you hold the drill straight and that the holes you are drilling are
centered on the wax marks.
STEP 8: Run speaker wire to the Stealthbox
tm
installation area
and connect it to the enclosure.
STEP 9: Remove the bolts from the Stealthbox
tm
and place the
enclosure in its designated location within the vehicle.
STEP 10: Secure the enclosure from underneath the vehicle.
1/4" Bolt
Split Lock Washer
Flat Washer
Car's Sheet Metal
Enclosure Wall (fiberglass)
Threaded Insert
Molded into
Enclosure
Bead of Silicone Sealant
Loading ...