Loading ...
Loading ...
Loading ...
35
Condensation will form on the back wall of the Fridge; however it will normally run down the back
wall and into the drain hole behind the salad bin.
The drain hole will have a “cleaning spike” inserted into it. This ensures that small pieces off food
can not enter the drain. After you have cleaned the inside of your Fridge and removed any food
residues from around the whole, use the “cleaning spike” to make sure that there are no blockages.
Use standard furniture polish to clean the Fridge/Freezer exterior. Make sure that the doors are
closed to prevent polish getting on the magnetic door seal or inside.
The grille of the condenser at the back of the Fridge/Freezer and the adjacent components can be
vacuumed using a soft brush attachment.
Do not use harsh cleaners, scouring pads or solvents to clean any part of the Fridge/Freezer.
REVERSING THE DOOR SWING
1. Remove the right top hinger cover .
2. Remove the screws fixed the top-hinge with cross-slot screwdriver.
3. Replace the top-hinge and the top-door limit block and the door bearing bush to the other
side.
A. Remove the nut with sleeve.Take off the washer then remove the axes to the other
side and fixed.
Loading ...
Loading ...
Loading ...