Loading ...
Loading ...
Loading ...
18
Tip
To overwrite a programmed station, store •
another station in its place.
Select a preset radio station
1 In tuner mode, press PRESET/ALBUM
to select a preset number.
The radio station stored under the »
selected number is broadcasted.
Tip
Position the antenna as far as possible from •
TV, VCR or other radiation source.
For optimal reception, fully extend and adjust •
the position of the antenna.
FM stations with RDS
Radio Data System (RDS) is a service that
sends additional broadcast information along
with FM stations.
If you listen to a FM station with RDS signal,
“RDS” displays.
Display RDS information
1 Tune to the desired RDS radio station on
the FM waveband.
2 Press INFO/RDS on the remote control
repeatedly to switch through the
following information (if available):
Station name•
Program type (for example: News, •
Sport, etc.)
Frequency•
Stereo/Mono Mode•
Current time•
Date•
8 Listen to radio
Tune to a radio station
1 Press TUNER repeatedly to select FM.
2 Press SCAN.
The radio automatically tunes to a »
station with sufficient signal strength.
3 Repeat step 2 to tune to more stations.
To tune to a station with weak signal, •
press
/ repeatedly until you find
optimal reception.
Program radio stations
automatically
You can program a maximum of 30 preset
radio stations.
1 In the FM tuner mode, press and
hold SCAN for 2 seconds to activate
automatic program mode.
All available stations are stored in the »
order of reception strength.
The first programmed radio station is »
broadcast automatically.
Program radio stations
manually
You can program a maximum of 40 preset
radio stations.
1 Tune to a radio station. (See “Tune to a
radio station” section.)
2 Press PROG to activate program mode.
3 Press PRESET/ALBUM to allocate a
number to this radio station.
4 Press and hold PROG to confirm.
5 Repeat the above steps to program other
stations.
EN
Loading ...
Loading ...
Loading ...