Loading ...
Loading ...
Loading ...
ENGLISH
Installation Manual 39
Refrigerant piping system
▶ Regulation for refrigerant leakage
: the amount of refrigerant leakage should satisfy the following equation for human safety.
p If the above equation can not be satisfied, then follow the following steps.
- Selection of air conditioning system: select one of the next
1. Installation of effective opening part
2. Reconfirmation of Outside Unit capacity and piping length
3. Reduction of the amount of refrigerant
4. Installation of 2 or more security device (alarm for gas leakage)
- Change Indoor Unit type
: installation position should be over 2m(6.6ft) from the floor (Wall mounted type ’ Cassette type)
- Adoption of ventilation system
: choose ordinary ventilation system or building ventilation system
- Limitation in piping work
: Prepare for earthquake and thermal stress
Total amount of refrigerant in the system
≤ 0.44 (kg / m
3
)(0. 028(lb/ft
3
))
Volume of the room at which Indoor Unit of the least capacity is installed
Note:
Fill in the f-gas Label attached on outside about the quantity of the fluorinated greenhouse gases
① Manufacturing site (See Model Name label)
② Installation site (If possible being placed adjacent to the service points for the addition or removal of
refrigerant)
③ The total Charge (①+②)
▶
Refer to model information since the CF Value of correction factor differs depending on model.
u Special condition 2
If you install the indoor units below more than 5EA, calculate the amount of refrigerant by multiplying
the PF value according to the total pipe length(refer to the table below).
ARNU093TN*2/ARNU123TN*2/ARNU153TN*2/ARNU183TM*2/ARNU243TM*2
Total Pipe length Pipe length factor(PF)
< 100 m (328.1 ft) 1.00
100 m (328.1 ft) ~200 m (656.2 ft) 0.91
200 m (656.2 ft) < 0.82
Loading ...
Loading ...
Loading ...