Loading ...
Loading ...
Loading ...
FEATURES
CONTROL PANEL FEATURES
Figure 11 – Control Panel Features
1.
Engine Control Switch (RUN/STOP for
Manual Start Units):
ON - In the ON position, the switch
allows the generator to be started (for
manual start models).
OFF - In the OFF position, the switch
stops the engine.
2.
Hour Meter: Displays how many hours the
generator has been run when under load.
3.
Main Circuit Breaker: The main circuit
breaker controls total output of all outlets to
protect the generator.
4.
240-Volt, 30-Amp: Outlet can supply
either 240V output.
5.
120-Volt, 20-Amp: Each outlet is capable
of carrying a maximum of 20 amps on a
single receptacle or a combination of
both receptacles.
6.
20-Amp Circuit Breakers: Each circuit
breaker limits the current that can be
delivered through the 120-volt duplex outlets
to 20 amps.
7.
Ground Terminal: The ground terminal is
used to ground the generator.
8.
Engine Control Switch (ON/OFF for
Electric Start Units):
ON - When the switch is momentarily
depressed and held in the ON position, the
electric start motor engages and starts the
engine. Once the engine starts, release the
switch. (The switch will automatically go to
the ON position.)
ON - Once started, the switch will remain
in the ON position.
OFF - To stop the engine, move the switch
to the OFF position.
Loading ...
Loading ...
Loading ...