Loading ...
Loading ...
Loading ...
11
RCS Models – 30” , 36”
RPB Models – 30” , 36”
BURNER OPERATION
Push in and turn the control knob counter clockwise to HIGH to start the ignition process. The igniter will spark and
make a clicking sound. The clicking will stop after the burner ignites. The initial ignition may take a few seconds. You
may hear multiple clicks before it ignites.
After ignition, turn the knob to your desired setting.
Turn the knob to OFF to extinguish the burner. The flame may linger for several seconds until all the gas in the feeder
tube is burned off.
If the burner does not ignite, see the Before Calling for Service section for possible causes and
solutions.
Burners have a re-ignite feature in case the flame is extinguished for any reason. It may take several
seconds for the burner to re-ignite.
Never operate the burner with the knob set between the HIGH and OFF position. The flame will NOT
re-ignite in this position and a gas leak could occur.
ATTENTION
CAUTION
Loading ...
Loading ...
Loading ...