Loading ...
Loading ...
Loading ...
English
English
17
18
Notice
This product complies with the radio interference requirements of the
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EU. For the declaration of conformity, visit the Web site:
www.seenebula.com.
Due to the used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher.
Do not use the Device in the environment at too high or too low temperature, never
expose the Device under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 5
°
C~35
°
C.
It is recommended to charge the device in an environment with a temperature that
ranges from 5
°
C~25
°
C.
RF exposure information: The Maximum Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm between the device and the human body. To
maintain compliance with RF exposure requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Wi Operating Frequency Range: 2412~2472MHz(2.4G); 5150~5250MHz,
5725~5850MHz (5G)
Wi Max Output Power: 19dBm(2.4G); 15dBm(5G)
Bluetooth Operating Frequency Range: 2402~2480MHz; Bluetooth Max Output Power:
8dBm
5150~5250 MHz can be used indoor only.
The following importer is the responsible party (contact for EU matters only)
Importer:Anker Technology (UK) Ltd
Importer Address:Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham,
B11 2AA, United Kingdom
This product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
Troubleshooting
Never try to repair the product yourself. If you have problems using this product,
check the following points before you request service.
Sound
No sound from the soundbar’s speakers.
• Make sure you select the correct audio input on your soundbar and TV.
• Make sure your soundbar is not muted.
Sound is distorted or echoey.
• If you play audio from the TV, make sure that the TV is muted.
Bluetooth
A device cannot connect with the soundbar.
• Check if you have enabled the Bluetooth function of the device.
• Make sure the device is connected correctly.
• The soundbar is already connected with another Bluetooth device. Disconnect
that device and then pair with a new device.
Poor audio quality from a connected Bluetooth device.
• The Bluetooth reception is poor. Move the device closer to the soundbar or
remove any obstacle between the device and the soundbar.
Remote control
The remote control doesn’t work.
• Check if the batteries are installed properly.
• Replace the batteries.
Loading ...
Loading ...
Loading ...