Loading ...
Loading ...
Loading ...
6. Program end – removing the laundry
32
Program end
The program is finished when End/Anti-
Crease or End appears in the display.
The Start/Stop button light goes out.
The dryer will switch off automatically
15minutes after the end of the Anti-
crease phase (with programs without an
Anti-crease phase it will switch off
15minutes after the end of the
program).
Removing the laundry
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Pull the door open at the side with
the orange marker.
Remove the laundry.
Items left in the dryer could be
damaged by over-drying when the
dryer is used the next time.
Always remove all items from the
drum.
Turn the program selector to .
Remove the lint from the 2 lint filters
in the door opening: see the
“Cleaning and care – Lint filters”.
You must remove the fragrance
capsule (if present) beforehand. See
“Fragrance capsule”.
Shut the door with a gentle swing.
Empty the condensed water
container, if used.
Drum lighting
The inside of the drum lights up so that
you don't forget any items of laundry
when you empty it.
The drum lighting switches off
automatically (energy saving).
Loading ...
Loading ...
Loading ...