Loading ...
Loading ...
Loading ...
IMPREZA(NA) A1830BE-A (ENGLISH)
In case of emergency
9-14
(1) Connect one jumper cable to the positive (+)
terminal on the discharged battery.
(2) Connect the other end of the jumper cable to
the positive (+) terminal of the booster battery.
(3) Connect one end of the other cable to the
negative (–) terminal of the booster battery.
(4) Connect the other end of the cable to the en-
gine lifting bracket.
Make sure that the cables are not near any mov-
ing parts and that the cable clamps are not in
contact with any other metal.
5. Start the engine of the vehicle with the booster
battery and run it at moderate speed. Then start the
engine of the vehicle that has the discharged bat-
tery.
6. When finished, carefully disconnect the cables in
exactly the reverse order.
Engine overheating
WARNING
Never attempt to remove the radiator cap until
the engine has been shut off and has fully
cooled down. When the engine is hot, the
coolant is under pressure. Removing the cap
while the engine is still hot could release a
spray of boiling hot coolant, which could burn
you very seriously.
If the engine overheats, safely pull off the road and
stop the vehicle in a safe place.
J If steam is coming from the engine
compartment
Turn the engine off and get everyone away from the
vehicle until it cools down.
J If no steam is coming from the engine
compartment
1. Keep the engine running at idling speed.
2. Open the hood to ventilate the engine compart-
ment.
Loading ...
Loading ...
Loading ...