Loading ...
Loading ...
Loading ...
34
BEFORE YOU CALL FOR SERVICE
Please check the following before calling for service. It may save you time and expense.
PROBLEM POSSIBLE CAUSE SOLUTION
1 Part or all of range
does not operate.
• Power cord of range is not completely
connected to the electrical outlet.
• Power outage.
• Fuse/circuit breaker at home doesnʼt
work.
• Range is in Demo Mode.
• Make sure the power cord is tightly
connected to the outlet.
• Check house lights to be sure. Call your
local electric company for service.
• Replace the fuse or reset the circuit
breaker.
• See page 30 for how to cancel Demo
Mode.
2 Surface units do not
heat.
• No power to the appliance.
• Surface controls improperly set.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly
set. See page 14.
3 Surface units too hot or
not hot enough.
• Improper cookware being used. • Use pans which are flat and match the
diameter of the surface unit selected.
4 Surface unit stops
glowing.
• It is normal when turned to a lower
setting.
5 Scratches on glass
ceramic cooktop.
• Incorrect cleaning methods were used.
• Cookware with rough bottom has been
used.
• Use the recommended cleaning procedure.
See page 31.
• Use smooth, flat-bottomed cookware.
6 Areas of discoloration
on the cooktop.
• Food spillovers not cleaned before next
use.
• Use the recommended cleaning procedure.
See page 31.
7 Metalmarks on
cooktop.
• Sliding or scraping of metal pans on top. • Do not slide metal pans. When cool, clean
with cooktop cleaning cream to remove the
marks.
8 Brown streaks or specks
on cooktop glass sur-
face.
• Boilovers are cooked onto surface. • Use the recommended cleaning procedure.
See page 31.
9 Food in Microwave
Drawer is not heated.
• No power to the appliance.
• Drawer controls improperly set.
• Range is in Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly
set. See page 17.
• See page 30.
10 Microwave Drawer light
does not work.
• Light bulb is loose or burned out. • Call for service.
11 Oven does not work.
• No power to the appliance.
• Oven controls improperly set.
• Oven too hot.
• Range is in Demo Mode.
• See SOLUTION for PROBLEM 1.
• Check if the controls have been properly
set. See page 22.
• Allow the oven to cool below locking
temperature and then reset to the desired
setting/temperature.
• See page 30.
12 Oven light does not
work.
• Light bulb is loose or burned out. • Tighten or replace the bulb.
13 Touch controls will not
operate.
• Control Lock is on. • See page 29 to unlock.
Loading ...
Loading ...
Loading ...