Loading ...
Loading ...
Loading ...
Cleaning and maintenance
19
EN
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
3. To reassemble the door, put the hinges
in the relevant slots in the oven, making
sure that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
4.6 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
4.7 Removing the internal glass
panels
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by
the arrows (1).
2. Then, pull the front part upwards (2). In
this way, the 4 pins attached to the
glass detach from their housings in the
oven door.
3. Clean the external glass panel and the
panels previously removed. Use
absorbent kitchen roll. In case of
stubborn dirt, wash with a damp
sponge and neutral detergent.
4. Replace the panels in the reverse order
in which they were removed.
We recommend the use of
cleaning products distributed by
the manufacturer.
Loading ...
Loading ...
Loading ...