Loading ...
Loading ...
Loading ...
CHOOSINGLOADSIZES
•Mixlargeitemswithsmallitems.
Loadthedryerbytheamountofspace
itemstakeup,notbytheirweight.Do
notoverloadthedryer.Overcrowding
causesunevendryingand wrinkling,
and can cause items to wear out faster
(because of pilling).
• You may need to rearrange large items
(sheets, blankets, tablecloths) during
a cycle to reduce bailing or rolling up.
• For better tumbling action, when drying
only a few small items, add one or two
lint-free towels. This also prevents
small lightweight items from blocking
airflow.
SUPER EXTRA-LARGE
CAPACITY CAPACITY
Heavy 4 jeans 3jeans
Work 4 workpants 3 workpants
Clothes 2 workshirts 2 workshirts
1 sweatshirt 1 sweatshirt
1 sweatpants 1 sweatpants
Mixed 3 sheets 3 sheets
Load (1 king, 2 twin) (1 king, 2 twin)
4 pillowcases 2 pillowcases
2 shirts 2 shirts
2 blouses 2 blouses
8 T-shirts 6 T-shirts
6 shorts 5 shorts
8 handkerchiefs 6 handkerchiefs
Towels 9 bath towels 7 bath towels
9 hand towels 8 hand towels
10 wash cloths 9 wash cloths
USING DRYER
FABRIC SOFTENERS
Dryer fabric softeners are recommended
for reducing static cling. Always follow
package instructions carefully.
• Put one fabric softener sheet on top
of the load before starting the dryer.
Do not add a fabric softener sheet after
the drying cycle has started. Instant
heat can cause the fabric softener to
spot fabrics.
• Remove fabric softener stains by wet-
ting the stains and rubbing them with
liquid detergent or bar soap and rewash.
• Some fabric softeners can clog the
lint screen and slow drying. Use fabric
softeners labeled as dryer safe.
SAVING ENERGY
• Use the AUTO DRY Cycle to dry
most loads.
• Dry full loads only. Do not overdry.
• Avoid overloading dryer, adding wet
items to a partly dried load, or opening
the door unnecessarily.
• Shorten drying times by exhausting
dryer properly and cleaning exhaust
vent and outside exhaust hood as
needed.
• Keep the lint screen clean.
• Use dryer where room air temperature
is above 45°F.
• Sort loads by fabric weight and type.
31
Loading ...
Loading ...
Loading ...