Loading ...
Loading ...
Loading ...
17
En
Preparation
05
Preparation
Installing the Plasma Display
Location
• Avoid direct sunlight. Maintain adequate ventilation.
• The length of the system cable used to connect the Plasma
Display and the Media Receiver is about 3 m (9.8 feet).
• Because the Plasma Display is heavy, be sure to have
someone help you when moving it.
CAUTION
• If you place anything on the top of the Media Receiver, it will
not receive enough ventilation and will not operate properly.
NOTE
• Allow enough space around the upper and back parts when
installing to ensure adequate ventilation of the rear of the
unit.
Using the optional PIONEER stand
For details on installation, refer to the instruction manual
supplied with the stand.
CAUTION
• This product can be used only with the optional PDK-1013
stand. Using other stands can result in instability, possibly
causing injury.
Using the optional PIONEER speakers
For details on installation, refer to the instruction manual
supplied with the speaker.
CAUTION
Operating Environment
Operating environment temperature and humidity:
+0 °C to +40 °C (+32 °F to +104 °F), less than 85 %RH (cooling
vents not blocked) Do not install this unit in a poorly ventilated
area, or in locations exposed to high humidity or direct sunlight
(or strong artificial light)
Installing the Media Receiver
CAUTION
• Do not place a VCR or any other device on the top
of the Media Receiver.
• When installing, allow enough space on the sides
and above the Media Receiver.
• Do not block the side ventilation opening or the
rear exhaust opening of the Media Receiver.
CAUTION
Placing the Media Receiver in the vertical position can result in
product damage and malfunction.
Over 50 cm
(19 11/16 inches)
Over
10 cm
(3 15/16
inches)
PULL
OPEN
STANDBY/ON
ON STANDBY
REC
TIMER
Plasma Display
Media Receiver
System cable
(approx. 3 m/9.8 feet)
PULL
OPEN
STANDBY/ON
ON STANDBY
REC
TIMER
Over 5 cm
(2 inches)
Over 5 cm
(2 inches)
Over 5 cm
(2 inches)
Over 10 cm (3 15/16 inches)
Exhaust
opening
Ventilation
opening
PULL
OPEN
STANDBY/ON
ON STANDBY
REC
TIMER
PRO1130HD.book Page 17 Monday, July 11, 2005 9:26 AM
Loading ...
Loading ...
Loading ...