Loading ...
Loading ...
Loading ...
en Trouble shooting
8
Installing the metal mesh grease filter
1. Insert the metal grease filter. When you do this, take
hold of the metal grease filter from underneath with
your other hand.
Note: Make sure that the metal grease filter is
positioned correctly.
2. Swing the metal grease filter up and click it into
place.
3. If the metal grease filter has not been inserted
correctly, open the lock and reinsert the metal
grease filter correctly.
Replacing the activated charcoal filter
Note: To bind odours in circulating-air mode, you must
install an activated carbon filter. The different options for
operating the appliance in circulating-air mode can be
found in the brochure. Alternatively, ask your dealer.
The required accessories are available from specialist
retailers, from customer service or from the Online
Shop.
1. Open the cover on the top of the appliance.
2. Remove the old activated charcoal filter and insert
the new one.
3. Close the cover.
4. Reset the saturation indicator.~ "Saturation display"
on page 6
3Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:Warning
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
--------
LED lights
Defective LED lights may be replaced by the
manufacturer, their customer service or a qualified
technician (electrician) only.
:Warning
Risk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly
into the switched on LED lights for longer than 100
seconds.
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to the
electricity supply
Power cut Check whether other kitchen
appliances are working
Faulty fuse Check in the fuse box to make
sure that the fuse for the
appliance is OK
The lighting does
not work.
The LED lights
are defective.
Call the after-sales service.
The button illumi-
nation does not
work.
The control unit is
faulty.
Call the aftersales service.
Loading ...
Loading ...
Loading ...