Bertazzoni MD24X User Manual

Loading ...

ANTI-TIP BLOCK

NORMAL INSTALLATION STEPS

Anti-Tip Block Installation Instructions

• To reduce the risk of tipping of the drawer, the Anti-Tip block

must be properly installed located 14-13/16" above the

oor on which the appliance will sit. The 6" Anti-Tip block

must be provided by the installer. See gure 1 and 3.

The Anti-Tip block prevents serious injury that might result

from spilled hot liquids.

• If the Drawer Microwave is ever moved to a different loca-

tion, the Anti-Tip block must also be moved and installed.

When installed to the wall, make sure that the screws

completely penetrate the dry wall and are secured in wood

or metal so that the block is totally stable. When fastening,

be sure that the screws do not penetrate electrical wiring

or plumbing.

(101.6 mm)

5" (127 mm)

(152.4 mm)

3 1/2"

(89 mm)

Suggested electrical

outlet location*

Anti-Tip block

FIGURE 3

ELECTRICAL OUTLET

The electrical requirements are a 120 volt 60 Hz, AC only, 15

amp. or more protected electrical supply. It is recommended

that a separate circuit serving only this appliance be provided.

The Drawer Microwave is equipped with a 3-prong grounding

plug. It must be plugged into a wall receptacle that is properly

installed and grounded. Should you only have a 2-prong outlet,

have a qualied electrician install a correct wall receptacle.

Note: If you have any questions about the grounding or elec-

trical instructions, consult a qualied electrician or service

person.

* Can also be installed using an electrical outlet in an adjacent

cabinet within the area where the provided electrical cord

can reach.

Always check electrical codes for requirements.