Loading ...
Loading ...
Loading ...
6
Stainless Steel Surfaces (on some models)
Do not use a steel-wool pad; it will scratch the surface.
1. Shake bottle well.
2. Place a small amount of CERAMA BRYTE
®
Stainless Steel Cleaning Polish and
Conditioner on a dry cloth or dry paper towel.
3. Clean a small area (approximately 8” x 8”/20.3 cm x 20.3 cm), rubbing with the
grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.
To order:
To order CERAMA BRYTE
®
Stainless Steel Cleaning Polish and Conditioner, please call
our toll-free number:
National Parts Center 1.800.661.1616
www.GEAppliances.ca
CERAMA BRYTE
®
Stainless Steel Cleaning
Polish and Conditioner # PM10X313
Hood Lights
This hood requires two bulbs (notincluded), maximum 50 watts.
Purchase and install WB27M02956, 50 W Maximum halogen bulbs.
When replacing a bulb, let it cool rst. Make sure that power to the light has been
turned off. Never allow a hot bulb to come into contact with water.
WARNING: To reduce the risk of electric shock, do not connect electrical power
to the hood without both bulbs in place.
To change the light bulbs:
See page 4 and Fig.9.
CAUTION: • Do not touch the hood light bulbs when they are on. They may be
hot enough to cause injury.
• The light bulbs operate at extremely high temperatures. If they
shatter, the hot glass could cause personal injury.
Consumer Support
Troubleshooting Tips
Operating
Instructions
Safety Instructions Care and Cleaning
Loading ...
Loading ...
Loading ...