Loading ...
Loading ...
Loading ...
3EN
temperature matches room
temperature before connecting it to
the power outlet.
• Parts of this product can be made of
glass. Handle with care to avoid injury
and damage.
Risk of overheating!
• Never install this product in a
conned space. Always leave a
space of at least four inches around
the product for ventilation. Ensure
curtains or other objects never cover
the ventilation slots on the product.
Risk of contamination!
• Do not mix batteries (old and new
or carbon and alkaine, etc.).
• Danger of explosion if batteries are
incorrectly replaced. Replace only
with the same or equivalent type.
• Remove batteries if they are
exhausted or if the remote control is
not to be used for a long time.
• Batteries contain chemical
substances, they should be
disposed of properly.
Risk of swallowing batteries!
• The product/remote control may
contain a coin/button type battery,
which can be swallowed. Keep the
battery out of reach of children at
all times! If swallowed, the battery
can cause serious injury or death.
Severe internal burns can occur
within two hours of ingestion.
• If you suspect that a battery
has been swallowed or placed
inside any part of the body, seek
immediate medical attention.
• When you change the batteries,
always keep all new and
used batteries out of reach of
children. Ensure that the battery
compartment is completely secure
after you replace the battery.
• If the battery compartment cannot
be completely secured, discontinue
use of the product. Keep out of
reach of children and contact the
manufacturer.
This is CLASS II apparatus with double
insulation, and no protective earth
provided.
Use only the power supplies listed in
the user manual.
Mains fuse
This information applies only to
products with a UK mains plug.
This product is tted with an approved
non-molded plug. If you replace the
fuse, use one with:
•
the ratings shown on the plug,
•
a BS 1362 approval, and
•
the ASTA approval mark.
Contact your dealer if you are not sure
about what type of fuse to use.
Caution: To conform with the EMC
directive (2004/108/EC), do not detach
the plug from the power cord.
How to connect a plug
The wires in the power cord are colored
as follows: blue = neutral (N), brown =
live (L).
If the colors do not correspond with
the colors on your plug, identify the
terminals in your plug as follows:
1
Connect the blue wire to the
terminal marked N or colored black.
Loading ...
Loading ...
Loading ...