Loading ...
Loading ...
Loading ...
6
Unpacking
Carton Contents:
• Electric snow thrower
• Upper handle
• Middle frame
• Chute deector
• Upper crank rod
• Lower crank rod with crank rod connector
• Handle knobs/deector knobs (6)
• Square J-bolts (2)
• Carriage bolts (2)
• Deector bolts (2)
• Thumbscrew
• Washers (2)
• Manuals with registration card
1. Carefully remove the electric snow thrower and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric snow
thrower. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suocation risk!
Assembly
Handle Frame Assembly
1. Align the holes in the upper handle with those in the top of
the middle frame (Fig. 1).
2. Secure the upper handle to the middle frame using 2
knobs and 2 carriage bolts. Install the knobs on the
outside of the unit, and tighten (Fig. 2).
3. Align the holes in the bottom of the middle frame with
those on the lower handle (Fig. 3).
4. Secure the middle frame to the unit using 2 knobs and 2
J-bolts. Install the knobs on the inside of the lower handle,
and tighten (Fig. 4).
m CAUTION m
Inspect wiring, which, if damaged during shipping,
may cause serious bodily injury during equipment use.
If any damage is seen or suspected, do not assemble.
Instead, contact the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563)
for assistance.
Handle with care during assembly so that electrical
wiring does not become damaged.
Fig. 1
Handle
knob
Carriage bolt
Fig. 2
Fig. 3
Handle knob
Square J-bolt
Loading ...
Loading ...
Loading ...