Loading ...
Loading ...
Loading ...
aus Operating the appliance
28
Auto Power Off (Automatic
switch off after end of
programme)
Au t o Po wer Of f
To save energy, the dishwasher is
switched off 1 minute after
the programme ends. You can also
change this setting.
Possible settings are:
■ ˜:‹‹: The dishwasher does not
switch off automatically.
■ ˜:‹‚: The dishwasher switches off
after 1 minute.
■ ˜:‹ƒ: The dishwasher switches off
after 2 hours.
Note: Note that with the settings ˜:‹‚
and ˜:‹ƒ the interior lighting 1" is
switched off. To activate the interior
lighting, press the ON/OFF switch (.
EmotionLight (Interior
lighting) *
Emot i onLi ght
* depending on the configuration of
your specific dishwasher
EmotionLight 1" is the interior lighting
for your dishwasher. You can switch the
interior lighting on “:‹‚ or off “:‹‹.
Notes
■ Depending on the setting of
AutoPowerOff, the interior lighting is
either switched on or off.
■ Note that when the appliance is
switched on and the door is open,
the interior lighting will automatically
be switched off after 1 hour.
Changing start programme *
Changi ng st ar t pr ogr amme
* depending on the features of your
dishwasher
You can change the “Start programme”
setting.
Tone volume
Whenever you switch the dishwasher on
or off, a signal sounds. You can adjust
the tone volume from †–:‹‹ - †–:‹„.
Button volume
When you are operating the dishwasher,
a signal sounds whenever a button is
pressed. You can adjust the volume of
the tone from ›–:‹‹ - ›–:‹„. If the
signal tone is annoying, set the value to
›–:‹‹ (button volume off).
Factory setting
You can reset all settings to the factory
setting.
Switching on the appliance
1. Turn tap fully on.
2. Switch on ON/OFF switch (.
The displays for the last programme
and last additional function selected
flash. These settings will be retained
unless another 0 programme key
is pressed. The expected
programme duration flashes on the
digital display @.
3. Press the START button X.
Programme sequence starts.
Remaining running time
display
When the programme is selected, the
remaining programme time is indicated
in the display window @.
The running time is determined during
the programme by the water
temperature, the quantity of dishes as
well as the degree of soiling and may
vary (depending on the selected
programme).
Loading ...
Loading ...
Loading ...