Loading ...
Loading ...
Loading ...
en Time-setting options
14
Cooking time
If you set the cooking time for your meal, the operation
stops automatically once this time has elapsed. The
oven stops heating.
Prerequisite: A type of heating and a temperature have
been set.
For example: Setting for 4D hot air, 180 °C, cooking
time 45 minutes.
1. Press the 0 button.
The time-setting options menu opens.
2. Set the cooking time using the rotary selector.
3. Press the Start/Stop button to start.
You can see the x cooking time counting down in
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the 0 button.
Cancelling the cooking time
Press the 0 button to open the time-setting options
menu. Turn the time back. The type of heating and
temperature set are shown in the display.
Changing the cooking time
Press the 0 button to open the time-setting options
menu. Change the cooking time using the rotary
selector.
End time
If you change the end time, please remember that
easily spoiled foods must not be allowed to remain in
the cooking compartment for too long.
Prerequisite: The selected operation has not already
begun. A cooking time has been set. The time-setting
options menu 0 is open.
Example in the picture: You put the dish in the cooking
compartment at 9:30. It takes 45 minutes to cook and
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
1. Touch the "End y" field.
The end time is displayed.
2. Using the rotary selector, set a later end time.
3. Confirm with the Start/Stop button.
The oven is in standby. The operation starts at the
appropriate time. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the 0 button.
Correcting the end time
This is possible if the oven is in standby. Use the 0
button to open the time-setting options menu, touch
"End y" and use the rotary selector to correct the end
time. Press the 0 button to close the menu.
Cancelling the end time
This is possible if the oven is on standby. To do so,
open the time-setting options menu using the
0 button.
Touch "End y" and reset the End time using the rotary
selector. The cooking time immediately starts to count
down.
ꑘ
ꑖ
PLQV
7LPHU
ꑗ
ꑘ
ꑖ
PLQV
7LPHU
ꑗ
ꑘ
ꑖ
PLQV
7LPHU
ꑗ
ꑘ
ꑖ
PLQV
7LPHU
&
'KRWDLU
ꑗ$SSOLDQFHVWDUWVLQ KPLQ
Childproof lock en
15
AChildproof lock
Chi l dpr oof l ock
Your appliance is equipped with a childproof lock so
that children cannot switch it on accidentally or change
any settings.
The control panel is locked and no settings can be
made. The appliance can only be switched off using the
on/off button.
Activating and deactivating
You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the
/ button for approx. 4
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
Changing settings
1. Press the On/Off button.
2. Press the menu button.
The operating modes menu opens.
3. Select the "Settings" operating mode.
The first basic setting appears and can be changed
using the rotary selector.
4. Touch the ¿ arrow.
5. Use the rotary selector to change the values.
6. Use the ¿ arrow to switch to the next basic settings.
7. Press the menu button to save.
"Save" or "Discard" appears on the display.
List of settings
This list tells you all the basic settings and how to
change them. Depending on the model of the appliance
you own, the display will show only those settings that
apply to your appliance.
You can change the following settings:
Caution!
For shelves and single rails: "Not retrofitted" setting.
For sets of two or three rails: "Retrofitted" setting.
Note: Changes to the language, button tone and
display brightness settings take effect immediately. All
other changes take effect after the settings have been
saved.
--------
Changing the time
You can change the time in the basic settings.
For example: Changing from summer to winter time.
1. Press the On/Off button.
2. Press the menu button.
The operating modes menu opens.
3. Touch "Settings".
4. Use the ¿ arrow to switch to "Clock".
5. Use the rotary selector to change the time.
6. Press the menu button.
"Save" or "Discard" appears on the display.
Power cut
Following a long power cut, the settings for initial use
are shown in the display.
Reset the language, time and date.
Setting Options
Select language Additional languages possible
Time of day Sets the current time
Date Sets the current date
Audible signal duration Short (30 s)
Medium (1 m)
Long (5 m)
Button tone Switched off (button tone still sounds
when switching on/off using the "On/off"
button)
Switched on
Display brightness Can be adjusted to one of five different
levels
Clock display Digital
Off
Lighting On during operation
Off during operation
Operation after switching
on
Main menu
Heating modes
Dishes*
Night-time dimming Switched off
Switched on (display dimmed between 10
p.m. and 5.59 a.m.)
Brand name logo Display
Do not display
Fan run-on time Recommended
Minimum
Pull-out system Not retrofitted
Retrofitted
Sabbath mode Switched on
Switched off
Home Connect Switches Wi-Fi on or off ~ "Home
Connect" on page 17
Factory settings Restore
Do not restore
*) Included, depending on appliance model
Loading ...
Loading ...
Loading ...