Loading ...
Loading ...
Loading ...
15
Lowes.com/harborbreeze
FINAL ASSEMBLY INSTRUCTIONS
4. Connect the black wire from the socket plate (H) to
the black wire from the motor (A), and the white wire
from the socket plate (H) to the white wire from the
motor (A).
4
A
H
5. Remove one of the three preassembled light plate
screws (MM) inside the light kit assembly (G).
Slightly loosen the remaining two light plate screws
(MM). Assemble the socket plate assembly (H) to
the light kit assembly (G) using the two keyslots in
the socket plate assembly (H). Replace the third light
plate screw (MM) and secure all three.
Hardware Used
MM
Light Plate Screw x 3
5
H
G
MM
6. Install the bulb (J) into the socket.
CAUTION: Bulbs are pressurized and may shatter. DO
NOT TOUCH BULBS WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove ¿ ngerprints with
alcohol prior to use. To reduce the risk of ¿ re, use 100-
watt max. type T4-minican JD E11 tungsten halogen
bulbs. Turn off the wall switch and allow the bulb to cool
for 10 minutes before relamping.
6
J
Loading ...
Loading ...
Loading ...