Loading ...
Loading ...
Loading ...
Charging
Connect the watch to the charging base as shown in the picture, and plug the other
end of the USB cable into the USB power adapter. At this time, the watch will
show the charging status. Pay attention to the correct direction of installation and
press tightly to make sure the watch won't slide loose from the base.
Charging requirement: Use the recommended computer USB ports or brand
mobile phone chargers to charge the band. The rated input voltage of such mobile
phone chargers must be DC 5.0V, and the input current must be greater than
500mA.
Note: Dry the charging contacts before charging so as not to cause bad contact and
failure to charge by sweat or other dirt.
Loading ...
Loading ...
Loading ...