Loading ...
Loading ...
Loading ...
14
2. Max Cool
The Max Cool feature assists with periods of heavy
usage, full grocery loads or temporarily warm room
temperatures.
Max Cool will reset the temperature for the
refrigerator drawer to 32°F (0°C) and -3°F (-19°C) for
the freezer drawer for a 24-hour period.
Press MAX COOL to activate Max Cool feature.
NOTE: The temperature display will remain at -3°F
(-19°C) and the indicator light will remain On for a
24-hour period unless any of the following happens:
User adjusts any of the compartment
temperatures
Cool Off Mode is entered (activated by user)
Sabbath Mode is entered (activated by user)
After 24 hours, the temperature will automatically
return to the previous temperature set point and
the indicator light will turn Off.
NOTE: If the previous temperature set point was set
to Soft Serve in the freezer drawer, the temperature
will return to the recommended temperature (0°F/-
17°C) instead when Max Cool is complete.
3. Ice Maker and Water Filtration System
(Refrigerator/Freezer Drawers only)
Connect to potable water supply.
IMPORTANT: After connecting the refrigerator to
a water source or replacing the water filter, fill and
discard three full containers of ice to prepare the
water filter for use before using ice.
TURNING THE ICE MAKER ONOFF
IMPORTANT: Use the Ice maker touch pad on the
control panel to turn on or off the Ice maker. Do not
adjust the wire arm located on the ice maker.
Press the ICEMAKER touch pad to turn on the ice
maker. The indicator will illuminate when On.
Press the ICEMAKER touch pad to turn off the ice
maker.
REMEMBER:
Allow 24 hours to produce the first batch of ice.
The quality of your ice will only be as good as the
quality of the water supplied to your ice maker.
Avoid connecting the ice maker to a softened
water supply. Water softener chemicals (such
as salt) can damage parts of the ice maker and
lead to poor quality ice. If a softened water supply
cannot be avoided, make sure the water softener
is operating properly and is well maintained.
Do not store anything in the ice storage bin.
4. Using Presets
For your convenience, each drawer also has
controls that are preset to recommended storage
temperatures for specific products.
Pressing any preset option will set the temperature to
the recommended temperature for each category:
Refrigerator Drawers
Produce: 39°F (3°C)
Assorted: 37° (2°C)
Beverage: 34°F (1°C)
Meat: 32°F (0°C)
Freezer Drawer
Soft Serve: 6°F (-14°C)
NOTE: Soft Serve is a temporary temperature setting
that will only last for 4 hours and returns to the
previous temperature set point when complete.
Assorted: 0°F (-17°C)
Spirits: -2°F (-18°C)
Deep Freeze: -8°F (-22°C)
5. Adjusting the Temperatures
When the refrigerator drawers are turned On for the
first time, a recommended temperature is set by
default. The controls adjust the temperature of both
compartments independently.
To adjust set point temperatures, press “+” (plus)
or “-” (minus) until the desired temperature
setting is reached.
Model JUDFP242*
NOTE: The set point for the double refrigerator
drawers model is 37°F(2°C). The set point range
for this model is 32°F to 42°F (0°C to 5°C) for both
compartments.
Model JUCFP242*
NOTE: The set point for the refrigerator/freezer
drawers model is 37°F (2°C) for the refrigerator drawer
and 0°F (-17°C) for the freezer drawer. The set point
range for the refrigerator/freezer drawers model is
32°F to 42°F (0°C to 5°C) for the refrigerator drawer
and -8°F to 6°F (-22°C to -14°C) for the freezer drawer.
NOTE: Wait at least 24 hours between adjustments
for the product to acclimate.
6. Viewing Celsius/Fahrenheit
Temperatures
Press the F/C touch pad to toggle between displaying
the temperature in degrees Fahrenheit and degrees
Celsius. The corresponding indicator will illuminate.
Loading ...
Loading ...
Loading ...