Loading ...
Loading ...
Loading ...
sharkclean.com
sharkclean.com
Remove cover and frame. Slide filter o frame.
Rinse with water. Air-dry completely for at least
24 hours before reinserting. Tap o loose dirt
between washes as needed.
Remove cover and filter. Rinse filter with water.
Air-dry completely for at least 24 hours before
reinserting. Tap o loose dirt between washes
as needed.
MAINTAINING YOUR VACUUMMAINTAINING YOUR VACUUM
PRE-MOTOR
FILTER
PRE-MOTOR FILTER POST-MOTOR FILTER
POST-MOTOR
FILTER
FILTER
FRAME
FILTER COVER
FILTER
COVER
CLEANING THE FILTERS
To clean filters, rinse with water only to prevent damage from cleaning chemicals. Allow all filters to air-dry
completely for at least 24 hours before replacing them in the vacuum to prevent liquid from being drawn into
electricparts.
IMPORTANT: DO NOT use soap when cleaning the filters.
Open the brushroll garage by sliding back the release
buttons. To close, insert the tabs on the lid into the
slots on the nozzle, then press down both sides.
Pull out roller by the tab. Remove any string, carpet
fibers, or hair, and remove debris from the roller
housing.
Wash the roller as needed, using only
water. Air-dry completely for at least 24 hours
before reinserting
.
Reinsert roller by sliding it into the front of the
floor nozzle until it clicks into place.
Run scissors along the guide on the brushroll
to remove any string, hair, or debris.
ACCESSING BRUSHROLLS CLEANING BRUSHROLLS
BRUSHROLL
SOFT ROLLER
Securely close the garage door by clicking it in to place
on both sides.
NOTE: Failure to securely click garage door in place
on both sides will result in the brushroll indicator light
blinking green and the brushrolls will not spin.
Turn o vacuum and remove battery.
Remove the handheld vacuum from the wand
and check all intake openings to the dust cup.
Turn o vacuum and remove battery.
Remove the hand vacuum and floor nozzle from
the wand and check the wand for blockages.
CHECKING FOR BLOCKAGES
Loading ...
Loading ...
Loading ...