Loading ...
Loading ...
Loading ...
22
USA
C
For energy saving, the machine
is automatically turned off
following the completion of the
program or if the program is not
started.
C
Leave your dishes in the
machine for about 15 minutes
to allow them cool down after
they are washed. Your dishes
will dry in a shorter time if you
leave the door of your machine
ajar during this period. This
process will increase the drying
effectiveness of your machine.
6.11 WATER CUT-OFF
WARNING
If mains water is cut or water inlet tap is
turned off the machine cannot take water
in and E:02 icon will flash on the program
indicator. As long as the problem continues,
washing program is paused and the water
inlet is checked regularly by the machine;
when the water is restored E:02 icon will
disappear after a while and the washing
program resumes.
6.12 OVERFLOWING
WARNING
If the machine intakes too much water or
there is leakage at any of the components
then the machine will detect this and E:01
icon will flash on the Program indicator. As
long as the overflowing continues safety
algorithm will be active and try to discharge
the water. If overflowing stops and safety
is assured, E:01 icon will disappear. If E:01
does not disappear, there is a permanent
fault. In this case the authorised service
should be contacted.
InnerClean
This program is recommended to be
operated on each 1-2 months for machine
cleaning and necessary hygiene. The
program should be operated while the
machine is empty.
In order to achieve an efficient result, it is
recommended to use together with special
machine cleaning agents.
C
Do not use this program to clean
dishes. As it operates in high
temperatures, it is harmful for
the dishes.
Loading ...
Loading ...
Loading ...