Loading ...
Loading ...
Loading ...
12
Mid-Level Lighting Light Bulb Removal
To Remove Light Lens
Press Tabs
in Direction Shown
Mid Level Lighting
Mid-Level Lighting (some models)
The mid level and upper level lighting comes
on automatically when the door is opened.
IMPORTANT
To disconnect power to the unit, unplug
the unit or switch the breaker that supplies
power to the unit to the off position.
Replace the old bulb with a bulb of the
same wattage.
To replace the light bulbs:
1. To replace the light bulb, turn the
temperature control to OFF and unplug
the electrical cord.
2. Remove the lens from the lamp housing
by unsnapping it from the lamp housing
using your ngers or a screwdriver. Be
careful not to break the locking tabs on
the lamp housing.
3. Replace the old bulb with a bulb of the
same type and wattage.
4. To replace the lens, snap one side of the
lens opening to the tab on the lamp housing.
Then carefully attach the other side.
INTERIOR LIGHTING
LED Lighting (some models)
To Replace LED Lights:
1. Unplug the power cord.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and
pull the connector with the other hand
while pressing the connector latch.
4. Replace LED light and snap in place
assuring the light is facing in toward the
unit (inside fresh food).
CHANGING THE FILTER
PURE ADVANTAGE™ Air Filter
Your new Pure Advantage air lter is located
inside one of the 2-Liter Door Bins. The air
lter cover is located on the upper right side
of the control box. In general, you should
change the air lter with Part Number “EAFCBF”
every 6 months to ensure optimal ltering of
freezer odors. The replacement air lter can
be purchased on the Frigidaire website (www.
frigidaireapplianceparts.com) or call toll free in
the U.S. and Canada: 1-800-599-7569. Your elec-
tronic control is equipped with a Replace Air Filter
indicator to remind you to change your lter.
To Install Or Replace The Air Filter
• Pull down on the front of the Pure Ad-
vantage™ air lter cover to release the
hinged bottom cover.
• Allow bottom cover to swing open and
then remove the old lter and discard it.
• Unpackage the new lter and place it
inside the hinged bottom cover of the
housing.
• Push the hinged bottom cover upward
until the tab snaps into closed position.
replace air filter
hold to reset
press & hold
air
filter
temp
mode
alarm
off
control
lock
Open Air Filter Cover
Air Filter
Remove Air Filter
Loading ...
Loading ...
Loading ...